Follow these four easy steps and breathe new life into your work.
STEP 1: To start, remove large pieces of rust scale so Corroseal has a surface of fine rust to convert. This will avoid chipping later.
STEP 2: Scrub clean removing oil and dirt.
Start with a clean surface. Oil and dirt can make it difficult for Corroseal to adhere and react as needed, so cleaning first is crucial. Do not use an oil based cleaner for this step. We highly recommend Corroseal Cleaner for metal surface prep. Rinse thoroughly after cleaning. Then rinse again just to be sure.
STEP 3: Using a brush, roller or spray, apply a thick coat of Corroseal. The thicker, the better. It will be white when first applied, then begin to turn black as it converts rust. Check in 15 minutes, if brown or gray spots peak through, apply another thick coat. A second coat is encouraged to get all rust covered with no seepage. Check again in 15 minutes and reapply as needed.
STEP 4: Once dry, it is primed and ready for paint. Painting will ensure extra protection from future rust. Enjoy!
|Corroseal Rust Converter - 1 Quart||Corroseal Rust Converter - 1 Gallon||Corroseal Rust Converter - 5 Gallon||Corroseal Cleaner||Clean-up Made Easy!|
|Best for:||Converting rust & priming||Converting rust & priming||Converting rust & priming||Safely cleans metal, plastic, concrete and painted surfaces||Soap with built-in scrubber takes paint, grease, oil, & grime off skin quickly & safely|
|Water-based:||✓||✓||✓||Mild pH, safe to use on most water safe surfaces||✓|
|Restore metal surfaces:||✓||✓||✓||Preps metal surfaces before Corroseal Rust Converter|
|Protect surfaces from rust & corrosion:||✓||✓||✓||Cleaner & degreaser|
|Easy to apply:||Brush, roll or spray||Brush, roll or spray||Brush, roll or spray||Spray, mop & bucket, pressure washer and more|
|Coverage||200-250 square feet / gallon||200-250 square feet / gallon||200-250 square feet / gallon||Depends on surface type|
Don't remove rust, convert rust. Corroseal rust converter is an elite, industrial strength product for all your marine, household, automotive, and industrial rust problems. Extend the life of your metal equipment by protecting it from rust and corrosion. Rust occurs naturally when the iron in steel oxidizes and returns to its original state, iron oxide. Through an innovative chemical conversion process, Corroseal Rust Converter converts rust into a stable substance, magnetite. It also primes the surface with a high quality latex metal primer at the same time. Corroseal truly provides one step corrosion control. Corroseal is the best way to deal with rust because it is less expensive, less time consuming, and is much more than sandblasting. Corroseal eliminates the need to sandblast rust by chemically converting rust from iron oxide to magnetite, a black and inert substance. Corroseal rust converter is your best rust treatment and corrosion control option because it meets all your metal surface preparation needs by converting the rust and priming the metal surface at the same time.