Specifications:
Nozzle size:1.4mm 1.7mm 2.0mm
Nozzle Material: Stainless steel
Working pressure: 29-50PSI
Air consumption: 3.0-6.0CFM
Cup capacity: 600ML
Transmission: Gravity
Spray Width :240-280mm
Spraying distance:18-23cm

Suitable for:
It can be used for photocatalytic coating,
Sofa furniture surface maintenance and repair,
Wall painting car painting, art artistic drawing,
Wall painting,
Arts crafts, model making,
Decorating ceramic resin, various potions spraying, clothing spray maps

Package contains
1x Air Spray Gun
1x600ml watering can
1x cleaning brush
1x oil filter
1x Instruction Manual
Before First Use
NOTICE: Before first use, clean the
Spray Gun thoroughly.

If not removed, the material used for testing and corrosion prevention will contaminate paint.

Spraying Technique
CAUTION: DO NOT STOP WHEN SPRAYING.

Spraying materials will start to set and dry.as soon as they come in contact with the air.

They will cause a permanent clog if not cleared.immediately.If discontinuing spraying for more than half an hour, turn off the air supply, disconnect Cup from Gun Body and thoroughly rinse Cup and Gun Body with fresh, clean water.

Paint Preparation and Filling
Note:Proper paint mixture is essential. Follow the manufacturer’s directions. Most paints will spray easily if they are thinned properly.

1. Thread the Cup to the Gun Body and tighten until the Cup is securely in place.

2. Thin the paint according to manufacturer’s directions and mix thoroughly.

3. Carefully strain the paint through a paint strainer or a piece of cheesecloth.