The 23 inch Ninja Match & Feeder models with Airdrive design - silky smooth running and optimal power transmission. The Airdrive rotor reduces the weight in the front part of the roller and provides better balance and greater sensitivity. The strong Tough Digigear gear has enormous retrieving power and ensures a soft, round running permanently. The new Airdrive bracket is lighter than before, enormously resilient and in combination with the new arm there is significantly less tangles when throwing. If the cord hangs on the arm it simply slides into the line roller by turning the crank over the arm and you do not have to intervene. The ATD Type-L brake releases the line under load without high initial resistance and ensures a lot of safety even when drilling a capital. The Longcast ABS spool made of aluminium has an optimised release edge that ensures less friction and higher casting distances. The Twistbuster III construction on the line roller ensures that especially braided line is not pressed flat when reeling and less twist is created. AIRDRIVE Design 4 Ball Bearings AIRDRIVE Rotor Tough Digiggear Gear ATD Type-L Brake System Cross Wrap Line Laying Forged ABS Aluminium Long Cast Spool AIRDRIVE Roller Shackle Twist Buster III Line Roller Machine Milled Aluminium Crank Tee Shape Crank Knob Size: 4000-C Ball. Total: 4 strings. : 150/0.28 m/mm about. : 5.2:1 Intake: 82 cm Brake: 12.0 kg Weight: 285 g