Power: 110V 60HZ; Motor Power: 1.8KW; Charge pressure: 30MPA; Working Pressure: 300BAR 30MPA 4500PSI. Air pump inflating speed: 2800r/min; Work flow: 50L/min;Practical test: 0.5 liter cylinder filled for 4 minutes to 300BAR/30MPA/4500PSI;Oil standard: IS0 VG 46 & AW 46.
WIDE APPLICATION: Perfect for fire fighting, paintball, leakage detecting, pressure-tight test, automobiles, air impermeability test, pressure proof test, etc.
PREMIUM QUALITY: Designed with two-stage compression and two water-oil separators for performance stability. It takes only 54 minutes to fill full 6.8L tank to 300BAR.
COOLING SYSTEM: Please prepare enough cooling water, it is recommended to be a vat of water to achieve better cooling effects. The water in container should be no less than 20L/5 gallon.WORKING WITHOUT WATER IS FORBIDDEN!
ATTENTION: The machine will Auto-Stop when the pressure reaches 300BAR/30MPA(You can set any pressure which less 300BAR/30MPA ,When this set-pressure is reached, the machine will Auto-Stop.) You will not have to turn it off manually,the machine will Auto-Stop.Notice: The temperature sensor is only compatible with AG13, 357A, CX157 and LR44W 1.5V batteries; batteries are NOT included and needs to be installed.

A single working time cannot exceed 30 minutes, the machine temperature cannot exceed 80 degrees Celsius(It is recommended to use within 65 degrees Celsius). If the working time is too long or the temperature is too high, the device will enter the over-temperature protection state, automatic shutdown. If the machine is too hot, automatic shutdown is a normal phenomenon, have a rest after a few minutes the temperature can return to normal, then start again. THE PUMP WILL SHUT DOWN AUTOMATICALLY WHEN THE PRESSURE REACHES 30MPA / 300bar,

High quality cylinder enables a long lifespan. Make sure to change the cooling water every 30 minutes to keep the cylinder temperature within the ultimate range.

Atmosphere air is compressed through two stage cylinder to reach 20Mpa/30Mpa ,3000/4500 psi. And the air is filtrated by oil and moisture separator before filling in tanks.The condensate and oil are separate from air and drain from separator.

Please make sure to use the ISO VG46 & AW46 standard oil. Regularly check the engine oil and make sure oil level stays above the red dot; change engine oil if oil color turns.

The temperature sensor is only compatible with AG13, 357A, CX157 and LR44W 1.5V batteries; batteries are NOT included and needs to be installed.
Keep this item out of children’s reach.
Do not use this product in humid or inflammable places.
Unauthorized detachment & repair is not recommended.
Make sure your socket can withstand over 20A electric current, or the circuit may get burnt.
To prevent scald, do not touch the head of the machine once it stops working.
Please change the cooling water every 30 minutes to keep the cylinder temperature within the ultimate range.
Regularly check the engine oil and make sure oil level stays above the red dot; change engine oil if oil color turns.
Please make sure to use the ISO VG46 & AW46 standard oil.