Amazon Basics Smart Single Pole Light Switch, Works with Alexa

Setup & Installation

No separate app or hub required. Install the switch, and power on. Open the Alexa app, tap the Devices icon, and click the + icon to get started.

Control From Anywhere

Amazon Basics Smart Switch lets you control your lights to turn on and off, or control them remotely when you're away. All you need is the Alexa app.

Voice Control

To use your device with Alexa, just say phrases like “Alexa, turn on first switch", "Alexa, set brightness to 50%", or "Alexa, dim the light".

Scheduling & Routines

Use the Alexa app to create routines for your smart switch that make life easier. For example, set a routine that turns on lights at sunset.

Single Pole Smart Switch Installation

Are neutral wires required?

Yes, neutral wires are required for installation (present for most US homes built after 1978). To check, turn off power at the circuit breaker and remove the existing switch. A pair of white wires should be present. If unsure, consult an electrician.

What if I'm having issues installing my smart switch?

1. Verify you have NEUTRAL wires

2. Verify if the switch is wired correctly. The LED blinks green when installation is complete

3. Consult a licensed electrician if you have additional questions

What if I can't connect my device to Alexa?

1. Verify your Alexa device and Alexa app have the latest software version

2. Make sure your Alexa device and switch are connected to the same Wi-Fi network

3. Verify your paired device is within 30 ft (9m) of your switch

4. Reset your smart switch

How do I reset my smart switch?

To reset your smart switch: Press and hold the on/off switch for 10 seconds; release the switch once you see the status indicator blinking green and red; once the indicator blinks green only, reset is complete and the switch is ready to set up

Installation & Product Requirements

Customer Support	Please refer to the installation video, user manual, and troubleshooting guide located under the Product Guides and Documentation section on detail page; product order support also available by calling 877-485-0385
Electrical Ratings	Input: 120VAC, 60Hz; Output: 120VAC Max
Lighting Loads	CFL or LED: 150W Max, Incandescent: 600W Max
Wiring Requirements	Neutral wire required
Network Connectivity	2.4 GHz only, 802.11 b/g/n; does not support 5GHz networks or connecting to ad-hoc (or peer-to-peer) Wi-Fi networks
Use	For indoor use only
Switch Control	May be controlled by voice after setting up with the Alexa app, or used as a traditional light switch with the on/off controls located on the switch
Integrations	Amazon Basics Smart Switch is optimized for simple setup and exclusive use with Alexa; it does not support other voice assistants or smart hubs
Alexa App	The Alexa app is compatible with Fire OS, Android, and iOS devices
Included in the Box	(1) Amazon Basics Smart Switch, wall plate, mounting frame, wire nuts, screws, quick start guide, and user manual
Service & Terms	Use of Amazon Basics Smart Switch and Dimmer is subject to the terms found here: www.amazon.com/gp/help/customer/display.html?nodeId=201566380