Description

Wishiot Feetech FS90R Micro Servo 360 Degree Continuous Rotation RC Servo Motor 9g for Arduino Microbit Robotic Helicopter Airplane Boat

This mini 360 Degree servo with accessories is ideal for micro-controller systems like the BBC micro:bit, Arduino, Raspberry Pi and PICAXE.
The 9g Continuous Rotation Micro Servo is the least expensive continuous rotation servo on the market and includes three types of servo horns. Use it to make a mini 2WD robot without the need for a motor controller!
They may require some simple calibration, simply tell the servo to 'stop' and then gently adjust the potentiometer in the recessed hole with a small screwdriver until the servo stops moving.
Apply Environmental Condition
Storage Temperature Range: -30℃～80℃
Operating Temperature Range: -15℃～70℃

Standard Test Environment
Temperature range: 25℃ ±5℃
Humidity range: 65%±10%

Mechanical Specification
Size: A：23.2mm B：12.5mm C：22mm
Weight: 9g ±0.2
Gear type: Plastic Gear(Nylon & POM )
Limit angle: NO limit
Bearing: NO Ball bearings
Horn gear spline: 20T(4.8mm)
Horn type: Plastic,POM
Case: Nylon & Fiberglass
Connector wire: 200mm ±5 mm
Motor: Metal brush motor
Splash water resistance: NO

Electrical Specification (Function of the Performance)
*Idle current(at stopped): 5mA @4.8V / 6mA @6V
*No load speed: 110RPM @4.8V / 130RPM @6V
*Runnig current(at no load): 100mA @4.8V / 120mA @6V
Peak stall torque: 1.3kg.cm*18.09oz.in @4.8V / 1.5kg.cm*20.86oz.in @6V
Stall current: 550mA @4.8V / 650mA @6V
(Note: "*"definition is average value when the servo runing with no load)

Control Specification:
Command signal: Pulse width modification
Amplifier type: Analog comparator
Pulse width range: 700～2300μsec
Stop position: 1500（±45） μsec
Running degree: NO limit Continuous rotation
Dead band width: 90 μsec
Rotating direction: CW(when 1500～700 μsec) / CCW(when 1500～2300 μsec)

Package Inlcuding:
1 X Feetech FS90R Servo

FAQ
Q: Hello, can you help me please. I’m looking for a servo motor that is not for rc cars (it should not rotate continuously). It should rotate 360 degrees and be able to rotate to a specific angle as i program it. Can you help me with that?
A: This reference is not suitable

Q: Purchased for an automated drape project i'm working on and but never checked if they can go in reverse... are they omni-directional?
A: Yes, it can go in reverse, please download specification from this link, you can check the Rotating direction in this file