Product description

FivePears 2 Pieces of Tongue and Groove Router Bits Set with 1/2" Shank

Description：

Tongue and Groove Router Bits Set is used to produce shaker rails and door frames for cabinet doors, floors, paneling and many other projects.The Router Bit Set can make perfect tongues or grooves and make them fit perfectly.The gap between the grooves can be adjusted to increase the fit by using the trim spacers (thickness: 0.2mm, 0.5mm) included with the kit.

Product Description:

Tongue and Groove Router Bits Set

Create a tongue and groove for a perfect connection between two materials.

Smooth Operation

Each bit is powder coated for an extra layer of protection.Enclosed bearing roller makes for easy alignment for a dreamless operation.

Advanced Materials

C3 Tungsten carbide blade provides a clean and accurated cut.

Specification:

C3 Tungsten Carbide
1/2 Inch Shank
3 Teeth T Shape
Max 18000 RPM
1x Tongue Router Bit
1x Groove Router Bit
2x Adjustment Washer (0.2mm, 0.5mm)

Instructions for use

Always ensure that the safety measures prescribed by the machine are enabled.
Make sure to use it on a router machine for which the product is applicable.
Before the product is received for use, check the drill bit for cracks or chips, if there is any problem, you can leave a message to Fivepears,we provide perfect after-sales service
Max. Rpm in 18000！！
Clamping to at least the K mark！！

Quality Construction

C3 Tungsten carbide blade provides a clean and accurated cut.1/2 inch shank also fits most routers for easy installation and safe use.

Smooth Operation

Each bit is powder coated for an extra layer of protection. This allows you to use multiple times.Enclosed bearing roller makes for easy alignment for a dreamless operation.

Scope of application

For cut wood,MDF,particle board, plywood,etc.

Advanced Materials

Fivepears products are made of C3 hard tungsten steel and 45# carbon steel for durability.

Clean Cutting

Sharp cutting edges made of Fivepears C3 grade carbide for smooth cuts

Shear Angle Design

Fivepears' shear angle design, smooth mirror surface helps chip removal speed

Professional bearing

A good bearing can often do more with less, Fivepears’s bearing can help you control the cutting speed and guide you to cut in the right direction.


	FivePears 2 Pcs of Tongue and Groove Router Bits Set（1/2’’ shank）	FivePears 2 Pcs of Tongue and Groove Router Bits Set（1/4’’ shank）	FivePears 1/2 inch Rabbet Router Bit with 6 Bearings Set	Fivepears 1/2 inch 12Pcs set	Fivepears 1/4 inch 12Pcs set

Customer Reviews	987	987	278	1,442	1,442
Price	$21.69	$20.69	$21.69	$23.99	$22.99
Product	FivePears 2 Pcs of Tongue and Groove Router Bits Set（1/2’’ shank）	FivePears 2 Pcs of Tongue and Groove Router Bits Set（1/4’’ shank）	FivePears 1/2 inch Rabbet Router Bit with 6 Bearings Set	Fivepears 1/2 inch 12Pcs set	Fivepears 1/4 inch 12Pcs set
Packing	Plastic case	Plastic case	Plastic case	Wood case	Wood case
Bits in set	2 Pcs	2 Pcs	2 Pcs	12 Pcs	12 Pcs
Purpose	Set for Tongue & Groove joint	Set for Tongue & Groove joint	Set for cutting rabbets of different depths	Multipurpose for beginner	Multipurpose for beginner
Shank	1/2" inch shank	1/4" inch shank	1/2" inch shank	1/2" inch shank	1/4" inch shank
Material	C3 Tungsten Carbide Cutters, High-quality Alloy Steel Shank	C3 Tungsten Carbide Cutters, High-quality Alloy Steel Shank	C3 Tungsten Carbide Cutters, High-quality Alloy Steel Shank	C3 Tungsten Carbide Cutters, High-quality Alloy Steel Shank	C3 Tungsten Carbide Cutters, High-quality Alloy Steel Shank
Operate Speed	Max. 18000 RPM	Max. 18000 RPM	Max. 18000 RPM	Router diameter / operate speed below 1" (25mm) / 18,000~24,000 rpm 1"-2" (25-50mm) / 16,000-18,000 revolutions 2"-2 1/2" (50-65mm) / 12,000-16,000 rpm 3" or above (>= 65mm) / below 12,000 rpm	Router diameter / operate speed below 1" (25mm) / 18,000~24,000 rpm 1"-2" (25-50mm) / 16,000-18,000 revolutions 2"-2 1/2" (50-65mm) / 12,000-16,000 rpm 3" or above (>= 65mm) / below 12,000 rpm