Features:
Material: Stainless Steel + ABS
Size: 225*45mm/8.86*1.77in
Type: Constant temperature
Working Temperature: It can reach at about 200°C / 390°F within a few seconds
Rated Power: 300W
Power Type: AC power supply
Rated Voltage: 110v
Frequency: 50-60Hz
Plug Type: US plug
Power Cable Length: 98cm/38 inch

Packing Included:
1 * Hot Air Gun
1 * User Manual

Notes:
1. This kind of gun can not adjust the temperature but it heats up quickly at about 200°C theoretically.
2. Therefore do not blow your Polymer Clay Works at one position for a long time to prevent distortion.
3. Keeping 5-6cm distance from work and about a 45 degree angle to heat until it is completed.
4. This heat gun is not a High Power one due to its 300W low power. But it is great for heating shrinkable film, embossed powder, rubber stamp, the best choice to replace toaster or oven and the polymer clay will become hard and bright after using the gun.
5. Caution with child ! ! ! Please minor children in the safe use of hot air gun under the guidance of an adult to accompany!
6. Do not use it continuously for more than 10 minutes to avoid overheating the machine!
7. Do not touch the hot nozzle when using or just after use.