Product description

Blind Rivets

Blind rivets, the rivet assembly is inserted into a hole drilled through the parts to be joined and a specially designed tool is used to draw the mandrel through the rivet. The compression force between the head of the mandrel and the tool expands the diameter of the tube throughout its length, locking the sheets being fastened if the hole was the correct size. The head of the mandrel also expands the blind end of the rivet to a diameter greater than that of the drilled hole, compressing the fastened sheets between the head of the rivet and the head of the mandrel. At a predetermined tension, the mandrel breaks at the necked location. With open tubular rivets, the head of the mandrel may or may not remain embedded in the expanded portion of the rivet, and can come loose at a later time. More expensive closed-end tubular rivets are formed around the mandrel so the head of the mandrel is always retained inside the blind end after installation.

Application

Widely used in buildings, ships, aircraft, machines, furniture, and other products. Good for both indoor and outdoor use.

Material

304 stainless steel

Mounting

According to the size of the hole, choose the blind rivet
Put the blind rivet into the hole and use the riveting machine to pull the riveting
Notice - Need special tools (like Riveter) to mounting this blind rivets.
Open end blind rivets with break pull mandrel, long rivet body and flat round head.