From the manufacturer

Crossfire II 2-7x32 Crossbow Scope Kit

First light, last light, and all day long, this crossbow topper will have you stacking bolts and filling tags in no time. Our purpose-built reticle not only gives you holdover points out to 100 yards, it features red and green illumination for low-light shooting. We also included the magnification and FPS on the magnification ring to keep the scope compatible with a variety of crossbows and setups, and a wide field of view makes it perfect for a variety of shooting situations. Plus, we’re including rings, flip caps, and a neoprene cover, so it’s ready to mount right out of the box.

Using the Scope

Reticle Focus

To adjust the reticle focus:

1. Set the magnification to the highest setting.

2. Point the scope at a blank white wall or up at the sky.

3. Glance through the scope. If the reticle is not in focus, look away and make an adjustment to the eyepiece. Repeat this process until the reticle is in sharp focus.

Magnification

The mag ring indicates both the power of magnification and the FPS for the crossbow. Yardage marks on the reticle will be accurate when setting the FPS on the magnification ring to your crossbow’s FPS setting. To adjust the magnification:

1. Rotate the magnification ring to the desired magnification or FPS.

Turrets

This crossbow scope features precision, finger-adjustable elevation and windage turrets with tactile clicks. To make adjustments:

1. Remove the elevation and/or windage turret cap(s).

2. Turn the turret in the direction you wish the arrow’s point of impact to go: up/down or left/right.

3. Replace the cap(s) when done.

Illumination

To activate the illumination, rotate the adjustment dial in either direction. This illumination dial allows for continuous adjustment between levels of brightness intensity. An off click between each color allows you to turn the illumination off and return to either color quickly.